Automatic Non Contact Liquid Level Controller Water Tank Level Sensor Controller for Pump AC220V

Feature: 1. Alarm Signal: Non contact level controller with 4 non contact level detecting heads realize the liquid level high and low control function, when the liquid level of the container is too low trigger the low level alarm signal from the low level sensor. 2. Automatic Stop: When the liquid level reaches a certain height, the high level sensor will send a signal to trigger the controller to automatically stop the pump work. Keeps the liquid level of the container stable. 3. 4 Sensors: Liquid level controller with 4 sensors with water inlet detection and water overflow detection, all round protection and control of the water level line of the tank or water tower. 4. Manual and Automatic Control: Diversified control of the level sensor allows control of the pump in manual or automatic mode. 5. Sensor Line Length: The non contact level controller has a sensor line length of three meters, which can be applied to more scenarios, such as factories and laboratories. Specification: Item Type: Non Contact Level Controller Function: Automatic Water Level Control, Water Inlet Detection, Water Overflow Detection Material: ABS Input Voltage: AC220V, 50Hz Working Current: ≤7A Power Consumption: ≤ 2W Sensor: Non Contact Liquid Level Sensor Load Power: Maximum Power 1600W When The Supply Voltage Is 220V If You Need To Control The Load Beyond This Limit Parameter, Please Install An Intermediate Relay(Not Including) Alarm Output: 800-1600W (Resistive Load) Output Mode: Relay Normally Open Contact Sensor Interface Voltage: DC12V Working Environment Temperature: -20-105℃, Relative Humidity ≤ 80% Installation Method: Screw Wall Mounting Size: Approx. 115 x 115 x 40mm / 4.5 x 1.6in Package List: 1 x Liquid Level Sensor Controller 1 x Screwdriver 4 x Screw 4 x Tie