Features:
This programmable logic controller uses industrialgrade 32bit MCU with strong antiinterference and faster speed.
High quality chip, stable performance, online download, online monitoring, automatic save when power off.
Program is written in ladder logic programming language, supports for GXDeveloper, GXwork2.
Programming port is the port for program upload, download, test and monitor.
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
Specifications:
Model: FX1N20mr
Working Voltage: DC24(V)
Wide Power Supply Voltage: 1028VDC
Baud Rate: 9600
Programming Software: for GXDeveloper, for GXwork2.
Size: Approx. 86 x 73 x 20mm 3.4 x 2.9 x 0.7inch
Weight: 120G
Package Included:
1 x PLC Board
Chinese programming software download address:Pan.baidu.coms1nty5XXn
PLC data download address: Pan.baidu.coms1eRNhn3O
Module function:
This module is programmable control, can achieve thousands of functions, stable and reliable working performance, builtin watchdog timer circuit, to ensure that the module for a long time to run!!!
Some of the common features are shown as follows:
Turn on the power supply, the relay 1 is closed for N seconds and then disconnect the relay 2 for N seconds.
When the power supply is turned on, the relay 1 is switched off after N seconds, and then the relay 2 is closed for N seconds and then is turned off.
The power supply is switched on, the relay 1, 2 have no action, when a signal or trigger button, relay 1 closed off after N seconds; then relay 2 closed off after N seconds, until the next trigger, repeat the same action.
Through the signal 1, 2 programming, the control can be achieved on the relay 1 and 2 arbitrarily.
When the signal 1 has a signal, the relay 1 is closed, the relay 2 is disconnected; when the signal 2 has a signal, the relay 1 is turned off, and the relay 2 is closed.
Can be connected to the NPN sensor signal, the sensor signal programming, to achieve arbitrary control of the relay.
When the signal 1 is triggered, the relay 1 is controlled, and when the signal 2 is triggered, the relay 2 is controlled.
Turn on the power supply, the control motor is turning N seconds, and then reverse N seconds, followed by the cycle.
When the signal 1 has a signal, the motor is controlled to rotate; when the signal 2 has a signal, the motor is reversed.
These are just some examples, modules can achieve far more than these functions
Input high speed pulse C235, C251 and FX1N compatible.
Output relay 1A output, Rated current 5A, can directly drive DC solenoid valve, AC solenoid valve, AC contactor, AC motor, etc,.
Precautions for use:
The PLC with two programming port. The 232 interface, you can directly use the USB232 serial port with a computer to download the program directly. The TTL interface.
Builtin Analog input AD, corresponding to internal data register D5030.(Not D8030)
Builtin Analog output DA, corresponding to internal data register D5101.
When the PLC need to connect with the touch screen or text, can be used to connect 232 programming port.
Assistant
Relay
Normal Use
M0 M383
Hold
After Power Off
M384M1535
Special
Use
M8000M8255
State
Holding
Use
S0S999
Timer
100MS
T0T199
10MS
T200T245
1MS
T246T249
100MS
accumulation
T250T255
Counter
16bit
C0C15(032767)
16bit(Hold
After Power Off)
C16C199
High
Speed(Hold After Power Off)
C200C255
Data Register
16bit
D0D127
16bit(Hold
After Power Off)
D128D5029
16bit
Special Use(AD)
D5030(Output
Voltage: 010V)
16bit
Special Use(DA)
D5101(Output
Voltage: 03.3V)
This programmable logic controller uses industrialgrade 32bit MCU with strong antiinterference and faster speed.
High quality chip, stable performance, online download, online monitoring, automatic save when power off.
Program is written in ladder logic programming language, supports for GXDeveloper, GXwork2.
Programming port is the port for program upload, download, test and monitor.
It is reusable, stable, easy to learn. The PLC transmission baud rate is 9600.
Teslim edilmediğinde para iadesi
