Feature:
1. 2 BACKLIT MODES: Default smart mode when turned on, with no operation for 3 minutes to automatically turn off the backlit. In off mode, press the LED key to switch to intelligent mode.
2. WAVELENGTH MEMORY FUNCTION: Added memory function to remember the test wavelength set before shutdown. No need to repeat settings.
3. RECOGNIZABLE FIBER TRANSMISSION FREQUENCY: Accurately identify the fiber transmission frequency, which can be used to determine the lighting mode and whether it continuously emits light during engineering construction.
4. INTELLIGENT STANDBY MODE: The automatic shutdown function is enabled by default when turned on, and it will automatically shut down after 10 minutes without any operation.
5. 2 UNIT DISPLAY: Press the (UNIT) key to select dBm, dB, and uW units in sequence. The test data will be displayed with the corresponding results.
6. EASY TO USE: Fiber power meter supports FC, SC, ST common interfaces, detachable metal pen heads, easy to replace ceramic cores.
Specification:
Item Type: Visual Fault Locator
Material: ABS
Wavelength Range (nm): 800 to 1700
Probe Type: For InGaAs
Measurement Range (dbm): 50 to +26
Uncertainty: + 5percent
Standard Wavelength (nm): 850, 980, 1270, 1300, 1310, 1490, 1550, 1577, 1625
Display Resolution:
Linear Display: 0.1percent
Logarithmic Display: 0.01dBm
Red Light Working Wavelength (nm): 650
Output Distance (km): Approx. 15000m 49212.6ft
Frequency Identification (Hz): 0, 270, 1000, 2000
Number of Offline Saved Data (PCS): 40
Input Voltage (V): 36
Working Temperature ( celsius ): 10 to +60
Storage Temperature ( celsius ): 25 to +70
Automatic Shutdown Time (min): 10
Battery Continuous Working Time (h): Greater than or equal to 48
Battery Type: 3.7V rechargeable lithium battery 600mah x 1 [shipped with built in battery]
.
Package List:
1 x Optical Fiber Power Meter 1 x Data Cable 1 x Manual 2 BACKLIT MODES: Default smart mode when turned on, with no operation for 3 minutes to automatically turn off the backlit. In off mode, press the LED key to switch to intelligent mode.
WAVELENGTH MEMORY FUNCTION: Added memory function to remember the test wavelength set before shutdown. No need to repeat settings.
RECOGNIZABLE FIBER TRANSMISSION FREQUENCY: Accurately identify the fiber transmission frequency, which can be used to determine the lighting mode and whether it continuously emits light during engineering construction.
INTELLIGENT STANDBY MODE: The automatic shutdown function is enabled by default when turned on, and it will automatically shut down after 10 minutes without any operation.
2 UNIT DISPLAY: Press the (UNIT) key to select dBm, dB, and uW units in sequence. The test data will be displayed with the corresponding results.
Teslim edilmediğinde para iadesi
