Upgraded image quality and night vision performance: The rear camera is equipped with an industry leading Japanese 1/2.7" sensor chip. It has a large aperture of F1.8 and 6 layers of high quality optics. 3D noise reduction technology reduces noise for sharper and detailed images Excellent performance in all lighting conditions
JAPANESE MARKET ONLY - Wide range of application: Supports both NTSC and PAL video signal output for rear camera, suitable for most of RCA interface monitor and navigation. The default output is NTSC video signal, mirrored image(used as rear camera), no reverse cable. 1. Cut the orange circle to change the PAL video signal output. 2. Cut white circle, flip the image left and right (use as front camera) 3. Cut the green circle to flip the image up and down (parallel ground setting). Please note that after cutting the circle, the change will not be reflected if you do not reconnect the camera power again. Note: Almost only Android navigation supports AHD video signal output, if you use Android navigation, please switch the navigation video input to NTSC or PAL
160° Ultra Wide Angle & 2 Mounting Methods: Upgraded 1.4mm aperture fisheye lens provides 160° ultra-wide angle for a wider field of view. It brings more comprehensive protection while restoring the image and is a good helper for back-run! The rear camera with the 2025 new chip has a function that reverses the image up and down, supporting two types, vertical and horizontal positioning, and be used as a front camera or rear camera. Comes with 4 adjustable angle spacers (3° 5° 7° -3° ) so you choose according to the actual installation situation
DURABLE & EASY TO INSTALL: The waterproof IP rating of the rear camera adopts IP69K. full metal housing and full seal potting process, we conduct high pressure waterproof test and 12 hours power aging test before leaving the factory. Even though the hot is cold, there is no need to worry about getting into or cloudy, and it will last a long time. The thin 6mm screws and 4-pin connectors allow for easy installation from the rear door of your vehicle by minimizing the opening. Improved 4-pin connector provides more stability and interface durability Integrated cable design simplifies the connection and facilitates installation. Support 12-24V buck board and double anti-shield wire reduces heat and increases durability and avoids interference with digital TV and other electronic devices
Warranty and Caution: Unexpected waterproof problems, defective appearance and function are not displayed, please contact us directly for a refund, or send us the pictures or parameters of your monitor, we will send you the right equipment for you. Note: The 4-pin connector is for connecting an extension cable, and the camera only supports connecting the monitor through the RCA connector, even if some monitors or vodors have the same 4-pin connector, they cannot be connected due to different definitions
We will only accept returns if the item is different from the picture shown
on the product page or is not in the same condition as the product description.
All items are 100% authentic: we verify authenticity before selling.