Magneto Coil Stator + Voltage Regulator + Gasket Assy For Honda CBR 1000 RR RA S 2017-2021
Features:
Made of high grade magnetically conductive material to minimize the magnetic losses.
Computerized winding to optimize quality of copper wiring
Higher grade of electric components.
Dramatically improves reliability and durability comparing to stock units.
Best quality lead wires with insulation bring both enhanced abrasion and heat resistant.
Rectifier made of highest quality electro-conducting lamination materials.
Improved heat sink and charging capabilities.
Direct replacement to your original unit.
Plug-and-play, direct fit, instruction is NOT Included.
Specifications:
Condition: Aftermarket 100% Brand New
Type: Stator + Regulator + Gasket
Replacement Part Number:
Stator Assy : 31120-MKF-D41
Rectifier, regulator: 31600-MJJ-D31
Fitment:
Fit for Honda CBR1000RA 2017-2021
Fit for Honda CBR1000RR 2017-2021
Fit for Honda CBR1000S 2017-2019
Fit for Honda CBR1000RR 2A 2017
Fit for Honda CBR1000RR 2AC 2017
Fit for Honda CBR1000RR A 2017
Fit for Honda CBR1000RR AC 2017
Fit for Honda CBR1000RR 2AC 2018
Fit for Honda CBR1000RR AC 2018
Fit for Honda CBR1000RR 2AC 2019
Fit for Honda CBR1000RR AC 2019
Fit for Honda CBR1000RR 2AC 2021
Fit for Honda CBR1000RR AC 2021
Fit for Honda CBR1000S1 2AC 2017
Fit for Honda CBR1000S2 2AC 2017
Fit for Honda CBR1000S1 2AC 2018
Fit for Honda CBR1000S1 2AC 2019
Fit for Honda CBR1000RA 2AC 2017
Fit for Honda CBR1000RA AC 2017
Fit for Honda CBR1000RA 2AC 2018
Fit for Honda CBR1000RA AC 2018
Fit for Honda CBR1000RA 2AC 2019
Fit for Honda CBR1000RA AC 2019
Fit for Honda CBR1000RA 2AC 2021
Fit for Honda CBR1000RA AC 2021
(Compatibility Chart is for reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitment)
Package Includes:
1 x Stator Coil
1 x Regulator Rectifier
1 x Generator Gasket
Note:
Before installing your new stator regulator rectifier;
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors.
Our stator / regulator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
You will get exactly what you see in pictures, if in doubt do not hesitate to compare our item to your original part.
Teslim edilmediğinde para iadesi
