Product Description
✅ This is a 280mm plated rear suspension set (left and right) for Honda, Yamaha, and Suzuki motorcycles. This is a universal aftermarket part, replacing the factory version.
✅ The silver-plated finish creates a cool and beautiful suspension look.
✅ Recommended for those looking to replace worn-out rear suspension or improve suspension performance.
✅ Installation Instructions Included ✅
Photo-illustrated instructions are included for easy installation, even for those new to customization.
✅ [Compatible Models] ✅
< Honda Motorcycles >
・ Monkey (Z50J) (AB27)
・ Gorilla (Z50J)
・ Dax ST50
・ Ape AC16
・ Mototra
・ Chari
・ Super Cub 50
・ Super Cub 90
・ Super Cub CD90
(Super Cub upper bushings must be replaced)
・ Magna 250 V-TWIN
・ YB-1
・ YB-1Four
・ GZ125HS
・ Little Cub (Upper spacer must be removed for installation)
☆★Product Description★☆
✅ Size: Push Center Distance: Approx. 280mm (Length from Mounting Bolt Center to Center)
・ Outer Diameter: Approx. 66mm
・Mounting Hole Diameter (Top): Approx. 10mm
・ Bottom: Approx. 10mm
・ Top and Bottom Mounting Hole Diameter/Thickness: 10mm/21mm
・ Spring Width: Approx. 50mm (widest point)
・ Spring Wire Diameter: Approx. 6.5mm
✅ Color: Silver Plated
✅ 2-Piece Set
✅ The spring preload can be adjusted to five positions, allowing you to customize the firmness. (A wrench is required to adjust the preload.)
✅ Compatible with a variety of vehicle models as long as the size is correct! (Installation may require modification depending on the model and year.)
※ While this is for the Monkey, depending on the vehicle's condition and year, there may be interference with the stock muffler and spring seat, and modification may be required.
※ The vehicle data above is for reference only. Please be sure to verify the model, hole diameter, installation length, etc. of your actual vehicle before purchasing.
・ We recommend applying Mecking when installing new.
[Product Liability Insurance Covered]
・ We are insured by Product Liability Insurance (PL Insurance), so you can shop with confidence.
・ 1-year warranty (conditions apply)! If you receive a defective product (even if it has been opened or used), please contact us directly by email from the order screen.
We will provide a refund or replacement after confirming the defect.
[Notes/Warranty Excludes]
*Please check before purchasing.
*Incompatible products will not be covered by the warranty.
*Failures due to improper installation or accidents are not covered by the warranty.
*Damage to this product caused by normal wear and tear or aging during use is not covered by the warranty.
*Please note that labor and service fees incurred for replacing a defective product are not covered by the warranty.
*While we are insured by Product Liability Insurance (PL Insurance), we cannot guarantee any compensation beyond that provided by the insurance company, including property damage and personal injury.
Please be aware of this before purchasing.
Caution (Disclaimer) > Please Read
*This product is for the Monkey, but depending on the vehicle's condition and model year, it may interfere with the stock muffler and spring seat, etc., and may require modification. *The above vehicle data is for reference only; please be sure to confirm your vehicle's model, hole diameter, installation length, etc. before purchasing.
✅ This is a 280mm plated rear suspension set (left and right) for Honda, Yamaha, and Suzuki motorcycles. This is a universal aftermarket part that replaces the factory type.
✅ The silver-plated finish creates a cool and beautiful suspension. ✅ Recommended for those looking to replace worn-out rear suspension or improve suspension performance. ✅ Installation Instructions Included ✅ Photographic instructions are included for easy installation, even for beginners.
✅ [Compatible Models] ✅ < Honda Motorcycles > ・ Monkey (Z50J) (AB27) ・ Gorilla (Z50J) ・ Dax ST50 ・ Ape AC16 ・ Motorola ・ Chari ・ Super Cub 50 ・ Super Cub 90 ・ Super Cub CD90 (Super Cub upper bushings must be replaced) ・ Magna 250 V-TWIN ・ YB-1 ・ YB-1Four ・ GZ125HS ・ Little Cub (Upper spacer must be removed for installation)
☆★Product Description★☆ ✅ Size: Push Center Distance: Approx. 280mm (Length from Mounting Bolt Center) ・ Outer Diameter: Approx. 66mm ・ Mounting Hole Diameter (Upper): Approx. 10mm ・ Lower: Approx. 10mm Upper and lower mounting hole diameter/thickness: 10mm/21mm ・ Spring width: Approx. 50mm (widest point) ・ Spring wire diameter: Approx. 6.5mm ✅ Color: Silver plated ✅ Set of 2
✅ The spring preload can be adjusted in 5 steps to suit your personal preference. (A wrench is required to adjust the preload.) ✅ Compatible with various vehicle models as long as the size is correct! (Note: Installation may require modifications depending on the model and year.) While this is for the Monkey, modifications may be required due to interference with the stock muffler and spring seat, depending on the vehicle's condition and year. The above vehicle data is for reference only; please verify your vehicle's model, hole diameter, mounting length, etc. before purchasing. ・ We recommend applying a mecking sealant when installing new. 280mm Chrome Plated Rear Suspension Shocks (Set of 2) for Honda, Yamaha, Suzuki, Momonkey, Z50J, Gorilla, AB27, 5-Level Spring Preload, Includes Installation Instructions