140W Bidirectional Fast Charging Module 2S 3S 4S 5S 6S Lithium Battery Charging Board Ip2366 Bms Charger Auto Temperature Contro

Parameter: Integrated FCP input and output fast charging protocol Integrated AFC input/output fast charging protocol Integrated SCP input/output fast charging protocol Integrated DRP Try.SRC protocol, PD3.1 input/output fast charging protocol Integrated QC2.0/QC3.0/QC3.0+ output fast charging protocols Support 5V, 9V, 12V, 15V, 20V, 28V block voltage Maximum support 28V5A, 140W Support lithium iron phosphate, lithium ternary, polymer and batteries Use operation: 1. First dial the switch (and dial the right) 2. Then connect the battery (the battery can only 2-6S, can not be reversed) 3. from the TYPE-C port plugged into the charger to activate (please use the standard regular charger, pay attention to a major brand of cell phones with a rare agreement with the fast-charging charger is modified by the original factory does not belong to the standard charging protocol, the kind of charging is only suitable for the original cell phone it is equipped with) 4. To discharge the phone first plugged in and then short press the key 5. If you have high precision requirements for power indication, make sure that your battery voltage and capacity and internal resistance are consistent enough, especially the internal resistance should be less than 15mΩ or less, and make sure that the wires connected to it have more than 15A current, and these conditions are met after charging and discharging cycle for more than one time, and the power will be calibrated automatically. What is the reason that the indicator light keeps flashing? 1: The indicator light keeps flashing to indicate an error message. 2: It may be that the switch is not dialed correctly or the voltage is not correct, resulting in the main control recognizes over-voltage or under-voltage, etc. so the indicator light has been flashing. 3: Maybe the output voltage of the plugged-in charger is too high or too low, the voltage deviation of the fast charging gear is too large or the ripple is too large, resulting in the board can not work properly, so the indicator light keeps flashing. Package include: Two-way fast charging module *1 The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.