Multi Protocol Fast Charging Power Bank Shell 100W DC Output 8 Slots 21700 No Welding DIY Battery Box With LED Light

Quantity : 1 High-concerned chemical : none Package : SOP is_d : Yes Dissipation Power : 30-65W Supply Voltage : 5V Type : Module Origin : Mainland China Condition : New Feature 1 : Power Bank Shell Feature 2 : 21700 Battery Box Feature 3 : PD 100W Fast Charging Feature 4 : DC Voltage Adjustable Feature 5 : Wireless Welding Feature 6 : Touch Control Feature 7 : Multi Protocol Charging Feature 8 : Transparent Shell Feature 9 : Outdoor Power Bank

Product Features 1. PD100W high-power super fast charging, meeting the high-power power supply needs of multiple devices 2. Transparent shell design, with visible internal circuit board cells for easy observation of internal working status Section 3.8 21700 welding free battery box, can be used by directly installing the battery cells, easy to disassemble and replace the battery 4. Touch control adjusts DC output voltage, adapts to various DC loads such as small experimental equipment, and is versatile 5. Built in multiple protection functions to ensure safety and stability during use

Product Specifications Input power: 30-65W (charger and charging cable require high performance) The maximum output of the DC port is 100W, and the current variation when supplying power to the laptop is normal Type-C input protocol: 5V/3.1A (normal input) SCP: 40W/PD3.0:65W/UFCS: 33W

USB Output Protocol 5V/3.1A (normal output) SCP：40W UFCS：33W PE1.1：7.5W PE2.+：45W QC3.0：36W QC2.0：24W AFC：18W FCP：18W SFCP：18W Multiple ports simultaneously output only 5V

Type-C output protocol 5V/3.1A (normal output) PD3.1：100W PD3.1：100W SCP：40W UFCS：33V VPE1.1：7.5W PE2.0：7.5W PE2.0：30W QC3+：45W PPS：44W PPS：44W QC3+：45W QC3.0：36W QC2.0：24W AFC：18W FCP：18W SFCP：18W Multi port output without fast charging

Button Function 1. Double click the button to switch the LED light, then press it again to switch the LED mode. The LED will be 100% bright~50% bright~25% bright~10HZ flashing~3HZ flashing~S0S 2. Press and hold the button for 2 seconds to enter/exit DC mode. At this time, the DC word will light up. Touch the button to adjust the DC voltage (adjust the voltage to 0.1V step/decrease)

Precautions After assembly, use a charger to charge and activate the power bank 2. After activation, the power bank should be completely discharged first, and then charged for about 20 hours to fully balance the battery 3. Only flat head unprotected 21700 batteries can be used, with intact appearance and no damage to the positive and negative terminals. If the skin is broken, insulation must be used. Sharp pointed batteries and batteries with protective plates that do not meet the requirements cannot be used

Packing List Mobile power kit * 1 Accessory package * 1 label:yes