------------------------------------------------------------------------------------------------------------------
【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
------------------------------------------------------------------------------------------------------------------
[Improved Design] 1. A cold shoe has been added to the upper right corner of the cage, making it easier to attach accessories such as the 3468 microphone and the 3286 LED video light. 2. Two 1/4"-20 screw holes spaced 18mm apart have been added to the bottom, making it compatible with the SMALLRIG quick-release plate for the Arca 3154. A QD hole has been added to the bottom, making it compatible with QD quick-release shoulder straps and other accessories.
【For 7R V / 7 IV / 7S III / 1 / 7R IV / 7 V】The SMALLRIG Cage 3667C is designed for the 7R V / 7 IV / 7S III / 1 / 7R IV / 7 V, facilitating low-angle shots and protecting the camera while providing a wide-angle view. Includes a range of accessory mounts. Note: The HDMI cable clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV as it blocks the sync terminal interface when with Alpha 7R V.
[Multiple Mounting Points] The cage has multiple 1/4"-20 and 3/8"-16 positioning holes for ARRI, allowing you to attach accessories such as the top handle 3765, side handle 2093, and monitor stand 2903B. There are two built-in cold shoe interfaces for attaching microphones, fill lights, and other equipment. The QD hole at the bottom is compatible with QD shoulder straps. Holes for attaching the wrist strap PAC2456 and shoulder strap PSC2428 are provided on both sides and the bottom of the cage.
[3-Point Locking] A positioning pin has been added to the bottom of the cage, and the 1/4"-20 screw and the M2.5 screw on the left side form a 3-point lock to stabilize the camera. The left locking slider is adaptable to various models. The [A7 IV] side is suitable for Alpha 7 IV and Alpha 7R V, and the [A7S III/A1] side is suitable for Alpha 7S III / Alpha 1 / Alpha 7R IV.
【All-around Protection】It has a built-in all-around rubber gasket to prevent scratches. Even with the cage installed, the camera interface, dials, buttons, and battery replacement are not affected. An opening and closing wrench design has been added to the compartment location, which better fits the curve of the aircraft, solves the problem of the little finger getting stuck, and enhances the grip of the aircraft.
【Built-in Quick Release Plate】The Arca's bottom quick release plate features 1/4"-20 holes spaced 18 mm apart, making it compatible with DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro / RS 4 / RS 4 Pro / RS 4 Mini. It fits DJI RS 2 / RSC 2 stabilizer mounting boards (riser plates) and SmallRig Arca-Swiss compatible quick release plate-3154.
SMALLRIG Full Cage for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV - 3667B
The SmallRig Full Cage 3667B for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III / Alpha 1 / Alpha 7R IV is designed to provide accessory mounts and protect your camera.
The camera is locked in place by one positioning pin at the bottom, one 1/4"-20 screw, and one M2.5 screw on the left side. The side lock adapter needs to be adjusted in orientation to fit the various camera types printed with "A7". "IV" is for the Alpha 7 IV and Alpha 7R V, while those printed with "A7S III/A1" are for the Alpha 7S III / Alpha 1 / Alpha 7R IV.
The built-in all-around protective spacer prevents scratches on the camera. It allows access to the cage interface, dials, buttons, or door. The compartment features a spindle wrench that fits the camera's curve and has ample room for a comfortable grip with your little finger.
Note:
After securing the 1/4"-20 screw at the bottom of the cage, remove the anti-sag pins from the staging holes in the compartment positions and secure them in their corresponding positions.
To use the side lock adapter, first remove the split ring on the left side of the camera.
The HDMI Cable Clamp 3000 is not compatible with Alpha 1 and Alpha 7R IV cameras, and when with the Alpha 7R V camera, it interferes with the sync terminal interface.
Compatibility:
In the case of Sony Alpha 7R V
In the case of Sony α7 IV
In the case of the Sony Alpha 7S III
In the case of Sony α1
In the case of the Sony Alpha 7R IV
Included items:
1 x Cage
Product dimensions: 146 x 107.6 x 64.5 mm
Package dimensions: 165 x 155
Teslim edilmediğinde para iadesi
