Specifications:
Material: Metal
Color: Multicolors
Voltage: 220V 50Hz
Power: 185W
Use: 5 minutes of continuous work
Motor speed: 20000 rpm
Homogenizer Blade(small): 0-20000 rpm
Homogenater Blade(large): 0-18000 rpm
Ambient temperature: -10 to 45
Size: (L)X(W)X(H) 27x17x37cm /10.63""x6.69""x14.57""(appr.)
Plug: China National Standard Plug(We will base on your country to send the corresponding adapter plug)
Features:
● The use of high-speed control system for silicon control, electronic circuit for photoelectric speed measurement, digital display.
● Provide reliable speed basis for the research results, the panel display is clear, the reading is intuitive, and the use is convenient.
● It is mainly used for animal, plant tissue homogenate crushing, cell dispersion.
Usage Instructions:
First, lift the coupling connecting the motor and the smashing rod so that it can remove the mashing rod, take out the mashing cup, add the mashed material and solution to the mashing cup, and put the cup as it is and Stick (the lower end of the rod is aligned with the shaft) and close the lid.
Look at the timer knob, turn it in the ON (normally open) position or the time position you want to specify, turn the speed control knob counterclockwise to the lowest position, and then connect Turn on the power, turn on the power switch, the indicator light is on, then turn the speed control knob clockwise to the speed you need, and mix it evenly. It can be used at medium and low speed. When plant mashing, high speed and high speed smash should be used.
If there is noise, when replacing the solution, repeat the above operation after turning off the power.
Precautions:
* This machine uses a three-eye safety socket, and must be connected to the ground before use.
* The machine should be placed on a flat surface to prevent vibration during operation.
* When crushing at high speed, use the hand to hold the lid. When the shaft is sliding up and down, it is difficult to inject one or two drops of oil to lubricate it.
* It is forbidden to crush bones, hard materials such as mineral sands
* This machine adopts series-excited motor. Its carbon brush is generally used for about 500 hours. It should be replaced in time to avoid the phenomenon that the commutator is worn after the carbon brush is polished.
* After the machine is finished, the cup should be washed upside down and placed in a dry and ventilated place.
Package Included:
1 x Dispersion Homogenizer
4 x Glass Bottle
2 x Nozzle
1 x Nozzle Kit
3 x Bracket
(excluding other decorations)
Instruction is not included. Please feel free to contact us if you have any questions. Hope a nice day!
Notice:
Please allow slight deviation of measurement due to manual measurement.
Due to different producing batches, product details might be a little different.
Due to different monitors and different light, the picture may not reflect the actual color of the item.
Please consider the
Teslim edilmediğinde para iadesi
