[Vehicle Inspection Compliant Cyber LED Projector Light KDR-K7] This large projector LED fog lamp features a dignified Vulcan design. The aluminum body with a CNC aluminum heat sink construction provides excellent thermal conductivity and efficiently dissipates heat, ensuring sustained brightness, not just immediately after irradiation. (The higher the temperature, the more difficult it is for the LED to pass current, resulting in a significant decrease in brightness. The light output (lumens) is measured immediately after illumination; die-cast lights, which have poor heat dissipation properties, may experience a significant decrease in light output after heating.) ■Instruction Manual (Online Only): As part of our decarbonization efforts and our goal of reducing our environmental impact, we have refrained from including a paper manual. You can view or download the instruction manual from each product page on the Kaedear official website.
[White/Yellow Switching] ●Switchable between white 6000K (high beam) and yellow 3000K (low beam). (White 6000K: Excellent visibility in fine weather, popular for dressing up your vehicle. / Yellow 3000K: Reduces diffused reflections in bad weather such as rain or fog, ensuring visibility.) ●The remote control memorizes the ON/OFF status and lighting color and supports five installation patterns, allowing for easy switching with the touch of a button.
Product Specifications: ■Material: CNC aluminum alloy, hard glass (special glass with excellent heat resistance, strength, and transmittance, resistant to yellowing and fourth spots) ■Brightness: 4000 lumens ■Color Temperature: White 6000K / Yellow 3000K ■Input: 12-15V ■Output: 2 x 20W per side (KDR-K7-W20), 2 x 45W per side (KDR-K7-W45) ■Wiring: Always positive, ACC, negative *Connecting to body ground without measuring resistance may cause a voltage drop. Connect directly to the negative terminal. *For vehicles where the headlights do not always stay on with the key on, wire the ACC line to the headlights to comply with safety regulations. ■Cut line: Can be used as a passing light ■Bar mount diameter: 32/28.6/25.4/22mm ■Angle: Pitch and yaw mounting angle and light axis adjustable ■Waterproof level: IP67 ■Certification: E-mark ■Vehicle inspection compliance: If the light is not installed in the position specified by the safety standards, it may not pass vehicle inspection or you may be subject to penalties for use under the Road Transport Vehicle Act. Ultimately, it is up to the inspector's discretion.
[Product Details] ■Operation: When power is applied to the ACC, it will start up in the previous lighting state. (Example: White light on → OFF → ON → White light on, Off → OFF → ON → Off) ■ Remote control operation: OFF → ON → Yellow → White → Yellow, ON → OFF ■ Size: 112mm (H) x 112mm (W) x 61mm (D) ■ Weight: 738g (per light unit) ■ Contents: Light unit (left and right), control box, switch, wiring, 2 light fixing brackets, 2 bar mounts (32mm), 2 connecting rods, 2 each of attachments (32mm, 28.6mm, 25.4mm, 22mm), 4 M8 x 14 bolts, 2 M8 x 20 machine screws, 2 M8 x 30 bolts, 2 M8 nuts, 4 M8 washers, 10 M8 spring washers, 1 each of switch brackets A, B, C, and D, 4 M8 x 25 bolts, 1 sheet of double-sided tape, 2 rubber rings for fixing the switch, hex wrench (4mm / 1.5mm), 1 tube of thread locking agent, 10 cable ties (150 x 3.5mm black) ■ Optional accessories: Fork clamp bar KDR-H11, Fender clamp bar KDR-H21
[Manufacturer's Warranty] ■Manufacturer's warranty period: 1 year (expires on the same day as the purchase date) Kaedia offers after-sales support to ensure customer satisfaction. Our nationally certified staff will provide expert support for any questions about the product, including installation on your motorcycle. In the unlikely event that a defect is diagnosed as being due to a product defect, we will repair or replace the product free of charge in accordance with our manufacturer's warranty regulations. For commercial use, the manufacturer's warranty period will be halved (e.g., 6 months for a 1-year warranty). For details, please refer to the warranty regulations on the official website. You can also contact us after installation or use. As a Japanese manufacturer, we will provide sincere support, so please feel free to contact us.
[Vehicle Inspection-Compliant Cyber LED Projector Light KDR-K7] This large projector LED fog lamp features a dignified Vulcan design. The aluminum body with a CNC aluminum heat sink construction provides excellent thermal conductivity, ensuring sustained brightness, not just immediately after firing. (The higher the temperature, the more difficult it is for the LED to draw current, resulting in a significant drop in brightness. The lumens measured immediately after lighting is turned on; die-cast lamps with poor heat dissipation may experience a significant drop in brightness after heating.) [White/Yellow Switching] ●Switchable between 6000K white (high beam) and 3000K yellow (low beam). (6000K white: Excellent visibility in sunny weather, popular for its dress-up effect. 3000K yellow: Reduces scattered light reflections in rainy, foggy, and other inclement weather for enhanced visibility.) ●The remote control memorizes the ON/OFF status and lighting color, and supports five installation methods, allowing for easy switching with the touch of a button. [Product Specifications] ■Material: CNC aluminum alloy, hard glass (special glass with excellent heat resistance, strength, and transmittance that is less likely to yellow or develop dark spots) ■Brightness: 4000 lumens ■Color temperature
Intensity: White 6000K / Yellow 3000K ■ Input: 12-15V ■ Output: 2 x 20W (KDR-K7-W20) per side, 2 x 45W (KDR-K7-W45) per side ■ Wiring: Always positive, ACC, negative. *Connecting to body ground without measuring resistance may cause a voltage drop. Connect directly to the negative terminal. *For vehicles where the headlights do not always stay on with the key on, wire the ACC line to the headlights to comply with safety standards. ■ Cut Line: Can be used as a passing light ■ Bar Mount Diameter: 32/28.6/25.4/22mm ■ Angle: Adjustable pitch and yaw mounting angle and beam axis ■ Waterproof Level: IP67 ■ Certification: E-Mark ■ Vehicle Inspection Compliant: Failure to install in the required position may result in failure to pass vehicle inspection or penalties for use under the Road Transport Vehicle Act. The final decision is at the discretion of the inspector. [Product Details] ■ Operation: When power is applied to the ACC, it will start up in the previous lighting state. (Example: White light → OFF → ON → White light, Off → OFF → ON → Off) ■ Remote control operation: OFF → ON →
Yellow → White → Yellow, ON → OFF ■ Dimensions: 112mm (H) x 112mm (W) x 61mm (D) ■ Weight: 738g (per light unit) ■ Contents: Light unit (left and right), control box, switch, wiring, two light fixing brackets, two bar mounts (32mm), two connecting rods, two attachments (32mm, 28.6mm, 25.4mm, 22mm), four M8 x 14 bolts, two M8 x 20 machine screws, two M8 x 30 bolts, two M8 nuts, four M8 washers, ten M8 spring washers, one each of switch brackets A, B, C, and D, four M8 x 25 bolts, one double-sided tape, two rubber rings for fixing the switch, one each of hex wrenches (4mm / 1.5mm), one bottle of thread locking agent, ten cable ties (150 x 3.5mm black) ■Options: Fork clamp bar KDR-H11, fender clamp bar KDR-H21 ■Instruction manual (online only): As part of our efforts to reduce environmental impact and decarbonize, we will refrain from enclosing a paper copy. You can view or download it from each product page on the Kaedear official website. [Manufacturer's warranty] ■
Car warranty period: 1 year (expires on the same day as the purchase date). Kaedia offers after-sales support to ensure customer satisfaction. Our nationally certified staff will provide expert support for any questions about the product, including installation on your motorcycle. In the unlikely event that a defect is diagnosed as being due to a product defect, we will repair or replace the product free of charge in accordance with our manufacturer's warranty regulations. For commercial use, the manufacturer's warranty period will be halved (e.g., 6 months for a 1-year warranty). For details, please refer to the warranty regulations on our official website. We welcome inquiries even after installation or use. As a Japanese manufacturer, we will provide sincere support, so please feel free to contact us.
Teslim edilmediğinde para iadesi
