• [High-brightness 3-chip LED lights up brightly] Uses a high-brightness 3-chip LED with three light-emitting elements in one LED, which provides bright and uniform lighting with less unevenness.24V specification that can be used for trucks.(Cannot be used in 12V passenger cars, etc.)
• [Flexible and Cuttable Design for Free Length Adjustment] The flexible tape design makes it easy to install on curved surfaces, and you can cut it to adjust the length as needed.(Can be cut at specified cut lines spaced 10cm apart) Wires come out from both sides, so if you cut them, you can use two without using solder.
• [High versatility for multiple uses] In addition to automobiles, it can be used to create stylish spaces in a variety of situations, including interior lighting, indirect lighting, undershelf lighting, backlighting behind TVs, interior lighting in cars, and store display lighting.
• [Easy to install and operate] Double-sided tape is included on the back of the LED tape light, making it easy to install without any tools.In addition, it lights up just by connecting the power supply, and no complicated operations are required.
• [Product specifications] Input voltage: DC24V / Approximate current consumption: Approx. 1.8A (varies depending on lot and color) / SMD type: 5050 / SMD number: 3 pieces every 5cm / Waterproof performance: Surface waterproofing (not compatible with underwater or environments exposed to large amounts of water) / Tape light width: Approx. 10mm / Tape light thickness: Approx. 3mm / Cable length: Approx. 12cm / Polarity: Red line (plus) Black line (minus)
■5050SMD3 chip that shines brightly with three lights in one!
It's so intense that you can't look directly at it!
■This tape light has wiring on both sides, so you can easily cut it in half and use it with two.
It can also be cut at 10cm intervals, so you can make a tape light of your desired length.
■The base of the tape light is completely waterproof with silicone coating.
*There are some exposed terminals on the back of the tape light.Do not install it in an uninsulated location.
■Double-sided tape is attached to the back of the tape, so it can be easily pasted.
[External dimensions]
Tape light length: 500cm
Tape light width: approx. 10mm
Tape light thickness: approx. 3mm
Cable length: approx. 8cm
*The red cord is the positive (+) pole, and the black cord is the negative (-) pole.
[Specifications/Specifications]
LED specifications: 5050 SMD 3-chip LED
Input voltage: DC24V
Current consumption: Approximately 1.8A (actual value)
Number of LEDs: 300 lights (6 LEDs in 10cm units)
Waterproofing: LED tape light body only
*A separate adapter is required to turn on AC100V.
*We do not provide support for connections due to processing, etc.Additionally, processed products are not covered by the warranty.
*Coloring may vary depending on arrival time and lot.