Driva-23 Nylon Drn-23 Plasterboard Dowels

DRIVA type plastic plugs for mounting in plasterboards DRN-23 mm, 200 pcs. DRN-23 plastic plugs are made of polyamide. Used as a body in combination with connecting elements. Most important parameters Model: DRN-23 Hole diameter: 8 mm Diameter (head): 14 mm Connector length: 23 mm Quantity in the package: 200 pcs. Material: polyamide Original Product of a Renowned Company KLIMAS Wkręt-Met ® Features and benefits 1. Optimal length Does not require much space at the back of the plasterboard. 2. Wide application Suitable for single and double plasterboards. 3. Speed of installation Using the KDR tip, it is not necessary to drill a pre-drilled hole. Example application Used as a body in combination with connecting elements. Thanks to the wide thread, the plug easily penetrates the plaster substrate, while at the same time providing a large contact surface, preventing local damage to the substrate. This is an example application only. Product specifications hole diameter: 8 mm diameter (head): 14 mm fastener length: 23 mm quantity per package: 200 pcs recommended screw diameter: 3.0-3.5 mm recommended screw length: 30 mm quantity in package: 200 pcs. material: polyamide Installation method Before installation, identify the surface in which the connector will be installed and compare the loads that the connector will transfer with the load-bearing capacities. To attach the body to the substrate, use a KDR screwdriver bit. If installation is without a KDR tip, a pilot hole must be drilled. After mounting the body, press the attached element to the substrate, thread the screw through the hole, and then tighten it using a hand or electric screwdriver. KLIMAS screws - the most common choice of professionals *measuring tape not included